Six months of a dull ache along the outside of my right forearm, always worst by Thursday. I use a normal ergonomic ish mouse on a 140 cm desk, roughly level with my elbow, and I've already dropped the chair twice…
27 inch 1440p monitor, about 6.5 kg with the VESA plate, sitting on a 25 mm particleboard desk. The generic arm I bought last year has started drooping about 4 cm overnight and the tilt knob strips if I look at it…
Working off a kitchen table and my neck has had enough. Budget tops out around $400 CAD for a 140 cm desk, which puts me on the single motor frames from the big marketplaces rather than the name brands. I don't need…
Nine hours a day at a desk, 34, no diagnosed back problem, just a low ache that arrives mid afternoon. Current chair is a $280 mesh thing from a big box store, three years old, and the foam under the seat has gone flat…
Bengaluru, working from home four days a week, 78 kg, 1.75 m. I've been through two ₹8 9k mesh chairs from online marketplaces and both failed the same way: seat mesh stretched, armrests went floppy, all inside eighteen…
Small flat, one desk, and realistically I'd stand twice a day rather than every hour. TROTTEN is the crank one, MITTZON is the electric one, and the gap between them is real money for me. The complication: I'm 1.68 m…
Tingling in the last two fingers of my mousing hand, mostly late in the day, going on about a month now. I have a flat cloth pad and I rest the heel of my hand on the desk edge, which is a fairly sharp laminate lip.…