65 percent kit, 68 switches, through hole diodes already populated thankfully. Six hours across two evenings, and nothing went wrong at all. It works, it looks fine, no bridges. But I kept stopping to re read…
Gasket mount, polycarbonate plate, linears, PBT caps. Sound has a hollow ring behind every keypress, like there is a small room under the board, and it is worst on the right hand side away from the daughterboard. Tape…
PCB mount screw in stabs, 6.25u spacebar. I have dielectric grease on the wire ends and in the housings, band aid mod on the plate, and the wire is bent as evenly as I can get it by eye. Left side is silent. Right side…
Board worked perfectly for four months. Swapped all 68 switches for linears, and now the entire bottom row registers nothing, spacebar included. Everything else is fine. One switch had a slightly bent pin which I…
Split board, three layers. The nav layer is on a hold of the key that types semicolon on tap. Other two layers are on dedicated thumb keys and they never fail. When I type quickly, roughly one time in five I get a…